ONLINE MANUAL
Scan this QR Code with your
mobile device to take you to
the online manual.
1. Place the mid-handle tube
onto the motor housing
tube, fit the bolt through
both handles from the
underside and secure with
the locking knob.
1. Switch Handle
2. Cord Retainer
3. Trigger Switch
4. Mid-Handle Tube
5. Bag Connector Handle
6. Motor Housing
7. Collection Bag
8. Cord Clip
9. Bag Connector
10. Locking Knobs
11. Rear Wheel
12. Guide Wheel
13. Assemble Bolts
14. Vacuum Inlet
GARDEN VACUUM
KNOW YOUR PRODUCT
1
2
3
4
5 6
8
7
9 10 11 12
1. ASSEMBLY
SETUP & PREPARATION
Fitting the handle
WARNING!:
ENSURE THE TOOL IS TURNED OFF AND
DISCONNECTED FROM THE POWER SUPPLY BEFORE
PERFORMING ANY OF THE FOLLOWING OPERATIONS.
Assembling the collection bag
2. Place the switch handle
tube onto the mid-handle
tube, fit the bolt through
both handles from the
underside and secure with
the locking knob.
3. Attach the loop on the top
of the collection bag to the
hook on the handle.
1. Attach the collection
bag connector to the
discharge outlet as
shown.
13
14
2. Rotate bag connector
handle upright to
secure.
