9
3.
Slide split pins (supplied) through each hole in
the four axle pins which are protruding through
the wheels (6).
4.
Bend the two ends of each split pin backwards
around the axle pin to secure the wheels (6) to the
mower body.
5.
Insert the wheel hub (7) over the wheels (6) and
push them in. This may require a little bit of force.
They are properly assembled to the wheels (6)
when they click into place.
Fitting the Lower Handles to the Mower Body
1.
Insert the lower handle (5) into the two holes in
the lower handle securing point (8) of the mower
body. The screw holes in the lower handle (5)
should face outwards.
2.
Fit the screw and washer (supplied) through the
hole above the rear wheel, align with the hole in
the lower handle (5) and then secure into place
using a phillips head screwdriver. Repeat the same
to the hole on the opposite rear side of the mower.
ASSEMBLY (cont.)
Summary of Contents for Ecomow ECO-320
Page 1: ......
