INTRODUCTION
SAFETY INSTRUCTIONS
ELECTRICAL SAFETY
4
Congratulations on purchasing an Ozito Lawn mower.
We aim to provide quality tools at an affordable price.
We hope you will enjoy using this tool for many years.
Your Ozito Ecomow Electric Mower ECO-320 has been
designed for small to medium sized lawns and is for
DIY purposes only.
WARNING!
When using mains-powered tools, basic safety precautions
including the following should always be followed to reduce risk of fire, electric
shock, personal injury and material damage.
Read the whole manual carefully and make sure you know how to switch the tool
off, in an emergency, before operating the tool.
Save these instructions and other documents supplied with this machine for
future reference.
The electric motor has been designed for one voltage only. Always check that the
power supply corresponds to the voltage on the rating plate.
This tool is double insulated in accordance with AS/NZS 60335-2; therefore
no earth wire is required. If the supply cord is damaged, it must be replaced
by an electrician or a power tool repairer in order to avoid a hazard.
1.
Before use, examine cord for damage; replace it if there are signs of damage
or ageing.
2.
Do not use the lawn mower if the electric cables are damaged or worn.
3.
Immediately disconnect from the mains electricity supply if the cord is cut,
or the insulation is damaged. Do not touch the electric cord until the electricity
supply has been disconnected. Do not repair a cut or damaged cord; replace
it with a new one.
4.
Your extension lead must be unwound, coiled leads can overheat and reduce
the efficiency of your mower.
5.
Keep lead away from lawn mower; always work away from the power point
mowing up and down never in circles.
6.
Do not pull lead around sharp objects.
7.
Always switch off at the mains before disconnecting any plug, cord or extension lead.
8.
Never carry the product by the cord.
Summary of Contents for Ecomow ECO-320
Page 1: ......
