10
ASSEMBLY (cont.)
Fitting and Using the Cord Retainer
•
To fit the cord retainer, slide it over the upper handle
end (on the switch side) before fixing the upper
handle to the lower handles.
•
The cord retainer (11) prevents the extension lead
from being disconnected during use. Fit the extension
lead (socket end of lead) through the loop and secure
over the hook as shown in the diagram. Once fitted,
connect the lawn mower power plug into the
extension lead socket.
Fitting the Upper Handle to the Lower Handles
•
Place the upper handle (2) over the upper ends
of the lower handles. Fit the bolts through
the inner side of the lower handle (5) and then
through the holes in the upper handle (2).
Secure in place by screwing the handle
securing knobs over the protruding ends of
the bolts.
Securing the Power Cord to the Handle
•
Secure the power cord running from the
switch housing to the body of the mower by
using the two cord clips (10) (supplied). Fit
one closer to the mower body end of the
handle, ensure a little slack is left between
the clip and where the cord enters the mower
housing. Fit the other cord clip (10) to the
upper end of the lower handle (5).
Assembling the Grass Catcher
•
To assemble the grass catcher (9) align the two
halves and push them together. Ensure the two
halves clip together around the entire
middle section.
Summary of Contents for Ecomow ECO-320
Page 1: ......
