![background image](http://html1.mh-extra.com/html/ozito/ecomow-eco-320/ecomow-eco-320_instruction-manual_1666430013.webp)
CUTTING HEIGHT ADJUSTMENT (cont.)
Adjusting the Rear Wheel Cutting Height Position (Fig. b)
1.
Turn the mower on its side.
2.
Pull the rear wheel axle towards the
mower's catcher flap.
3.
Locate the wheel axle into the desire
cutting height adjustment position.
Note:
Make sure that both rear right and left
wheel are located in the same cutting height
adjustment position.
Cutting Height Positions (Fig. c)
1. 31 mm (lowest cutting height position)
2. 47 mm
3. 63 mm (highest cutting height position)
Note: Disconnect the mower from the power supply and ensure that the
blade has stopped coasting before removing and fitting the blade.
Removing the Blade
1.
To remove the blade bolt, hold the fan firmly and with a spanner loosen the blade
bolt by turning it anti-clockwise.
2.
Remove the blade bolt, and blade.
3.
Inspect for damage and clean as necessary.
Renew your metal blade after 50 hours mowing or 2 years whichever is the
sooner – regardless of condition. If the blade is cracked or damaged replace it
with a new one. Never use a blade bolt if the insulated head is damaged, cracked
or missing.
Fitting the Blade
1.
Fit the blade to the fan with the tilt edges of the blade facing towards the mower,
ensuring the blade is located onto the fan location points correctly.
2.
Re-assemble blade bolt through blade and fan.
3.
Hold the fan firmly and tighten blade bolt with a spanner, by turning in a
clockwise direction.
Do not over tighten.
13
Fig. b
Fig. c
Summary of Contents for Ecomow ECO-320
Page 1: ......