Ozito Ecomow ECO-320 Instruction Manual Download Page 6

If not used properly this lawn mower can be dangerous! This lawn mower
can cause serious injury to the operator and others, the warnings and
safety instructions must be followed to ensure reasonable safety and
efficiency in using this lawn mower. The operator is responsible for
following the warning and safety and instructions in this manual and 
on the lawn mower. Never use the mower unless the catcher or guards
provided by the manufacturer are in the correct position.

6

GENERAL (cont.)

ADDITIONAL SAFETY RULES FOR LAWN MOWERS

19.

Do not tilt the lawn mower when the motor is running, except when starting or
stopping. In this case, do not tilt more than absolutely necessary and lift only
the part which is away from the operator. Always ensure that both hands are in
the operating position before returning the appliance to the ground.

20.

Do not put hands near the grass discharge chute.

21.

Never pick up or carry a mower when it is operating or still connected to the
mains supply.

22.

Remove the plug from the mains:

- before leaving the mower unattended for any period

- before clearing a blockage

- before checking, cleaning or working on the appliance

- if you hit an object. Do not use your lawn mower until you are sure that

the entire lawn mower is in a safe operating condition

- if the lawn mower starts to vibrate abnormally. Check immediately.

Excessive vibration can cause injury.

Explanation of Symbols on the Ecomow Electric Mower - ECO-320

WARNING

Read the user instructions carefully to make sure you understand all
the controls and what they do.

Always keep the lawn mower on the ground when mowing. 
Tilting or lifting the lawn mower may cause stones to be thrown out.

Keep bystanders away. Do not mow whilst people especially
children or pets are in the mowing area. 

Switch Off! Remove plug from mains before adjusting, cleaning or 
if cable is entangled or damaged. Keep the cable away from 
the blade.

!!

!!

!!

!!

!!

!!

 

 

 

 

 

 

 

 

 

 

 

 

    

Summary of Contents for Ecomow ECO-320

















Reviews: