OPERATION (cont.)
11
Inflating Tyres
Most tyre valves will connect directly with the flexible extension hose’s (9) brass
fitting but some tyres may have specialised valves in which case , one of the brass
accessory adaptors (10, 11) provided may need to be used.
Inflating Other Objects
To inflate other pneumatic toys, sport balls, gym balls and blow up beach/pool
apparatuses etc. with air, use the general inflating adaptor (12) or ball adaptor (10),
following the instructions on the relevant apparatus.
•
To prevent dirt, dust and other debris from entering the air pump, ensure the
ventilation slots of the air pump are clean and clear of the ground and all
fittings are clean.
•
Should the air pump not be used for prolonged periods of time, recharge the
batteries every two months.
•
Keep the ventilation slots of the air pump clean at all times. If possible prevent
foreign matter from entering the vents.
•
After each use, blow air through the air pump to ensure it is free from all dust
particles which may build up. Build up of dust particles may cause the air
pump to over heat and fail.
•
If the housing of the air pump requires cleaning do not use solvents but a
moist soft cloth only. Never let any liquid get inside the air pump; never
immerse any part of the air pump into a liquid.
Note:
Ozito Industries will not be responsible for any damage or injuries caused
by the repair of the air pump by an unauthorised person or by mishandling of the
air pump.
MAINTENANCE
Summary of Contents for APR-012
Page 1: ......
