1
Note:
The Test function will not
work if the Shade Number
Adjustor is set to ‘Grind’.
1. BATTERY CHECK
2 . UV/IR FILTER
SETUP & PREPARATION
WARNING!
ENSURE THAT ALL OPERATING PARTS ARE
CLEAN AND UNDAMAGED BEFORE USE. SCRATCHED OF
BROKEN PARTS SHOULD BE REPLACED IMMEDIATELY.
TEST
Testing The Helmet
Replacing The Battery
1 Turn the Shade Number
Adjustor and set it anywhere
between 9 and 13.
1 A red light will appear when the charge in the button cell battery gets
too low.
2 Place a flat head screwdriver (not supplied) into the slot in the
battery cap and turn it anti-clockwise to unlock it. Remove the cap.
3 Replace the used battery with a new CR2032 battery.
4 Replace the cap. Turn the cap clockwise to lock it in place.
2 Press the Auto Darkening Test
Button. The viewing window
should darken briefly before
returning to normal.
Note:
Light from welding should be sufficient to charge the solar-
assisted battery if the helmet is used regularly. If the helmet
is left in storage for long periods, it will need to be recharged
before use.
Charging The Helmet
1 To charge the helmet place it sunlight for 1 hour with the solar panel
directed towards the light.
Note:
Remove the Protective Film from the Filter and charge the helmet
before use.
