background image

Using the Equipment 

 

as a Blower Pistol

1.   To use the air gun as a 

blower pistol you must first 

unscrew and remove the 

rubber hose. 

2.   The blower nozzle can then be 

screwed into the inflation gun.

3.   By varying the pressure on the 

trigger, you can control the amount 

of compressed air released through 

the air nozzle.

WARNING!:

 OPERATOR IS ADVISED TO WEAR EYE 

PROTECTION WHEN USING THE AIR GUN. TAKE 

CARE NOT TO BLOW DIRT OR OTHER LOOSE 

PARTICLES TOWARDS YOURSELF OR OTHER PERSONS

4.   The blower nozzle adapter is useful 

for  blowing dust out of hollow 

spaces or hard to reach areas, 

such as vents in electrical items or 

between the keys of a keyboard. 

It is also useful for cleaning soiled 

equipment. 

ACK-0015

4. BLOWER PISTOL

WARNING!: 

DO NOT DIRECT THE JET OF 

COMPRESSED AIR TOWARDS PEOPLE OR ANIMALS.

Inflating other items

The compressor kit is supplied with a variety of adapters that can be 

fitted to the rubber hose. These adapters are suitable for different valves 

that are often used on inflatable items:

Adapter A

 is used for footballs, basketballs,  

soccer balls etc.

Adapter B

 is used for rubber dinghies,  

inflatable small swimming pools and air beds.

Adapter C

 is used for bicycle tyres with  

“French” or “Presta” valves.

Attaching Inflation Adaptors 

 

to the Rubber Hose

1.   Push the suitable adaptor into 

the rubber hose while pressing 

the hose tab.

2.   Once it is inserted, release  

the hose tab. 

3.   Turn the adaptor in a clockwise 

direction to secure it in place.

A

B

C

Summary of Contents for ACK-0015











Reviews: