background image

6. CLEANING & MAINTENANCE

OPERATION

IMPORTANT! 

BEFORE CLEANING YOUR COMPRESSOR 

OR CARRYING OUT ANY MAINTENANCE PROCEDURE, 

MAKE SURE THAT THE MOTOR IS OFF AND THE TOOL 

DISCONNECTED FROM THE POWER SUPPLY TO PREVENT 

ACCIDENTAL STARTING.

IMPORTANT! 

WAIT UNTIL THE COMPRESSOR HAS 

COMPLETELY COOLED DOWN. RISK OF BURNS!

IMPORTANT! 

ALWAYS DEPRESSURIZE THE EQUIPMENT 

BEFORE CARRYING OUT ANY CLEANING AND  

MAINTENANCE WORK.

Cleaning

•   Keep the safety devices free of dirt and dust as far as possible. 

Wipe the equipment with a clean cloth or blow it with compressed 

 

air at low pressure.

•   We recommend that you clean the appliance immediately 

 

after you use it.

•   Clean the appliance regularly with a damp cloth and some soft soap. 

Do not use cleaning agents or solvents; these may be aggressive to 

the plastic parts in the appliance. Ensure that no water can get into 

the interior of the appliance.

•   You must disconnect the hose and any spraying tools from the 

compressor before cleaning. Do not clean the compressor with 

water, solvents or the like.

5. TROUBLE SHOOTING

Problem

Cause

Solution

The compressor 

 

does not start

No supply voltage

 Check the supply 

voltage, the power 

plug and the socket-

outlet.

 Insufficient supply 

voltage

 Make sure that the 

extension cable is 

not too long.

Try another product 

in power point

 Outside temperature is 

too low

 Never operate 

with an outside 

temperature of 

below 5°c.

 Motor is overheated

 Allow the motor 

to cool down. If 

necessary, remedy 

the cause of the 

overheating.

The compressor 

starts but there is no 

pressure

 The seals are 

damaged.

 Check the seals 

and have any 

damaged seals 

replaced by a 

service centre

The compressor 

starts, but the tools 

do not .

 Loose  hose 

connections

 Check  the 

compressed air 

hose and tools 

and replace if 

necessary.

 Leak in a quick-lock 

coupling

 Check the quick-

lock coupling 

and replace if 

necessary.

MAINTENANCE

Summary of Contents for ACK-0015











Reviews: