Connecting to the Compressed Air Hose
1. Insert the nipple of the air tool into the
quick-lock coupling of the air hose.
2. The quick-lock sleeve will spring forward
automatically, connecting the accessory.
Disconnecting
1. To disconnect the air tool, pull back the
sleeve on the quick-lock coupling and
remove the tool.
Switching On and Off
Note:
It is recommended to use in conjunction with this appliance a
Residual Current Device (RCD) of rating not exceeding 30mA.
1. Attach the desired tool to the quick
release coupling of the air hose.
2. Connect the compressors’ power
cord to the mains power supply.
3. To switch ON the equipment, set the
On/Off switch to position “I” (On).
4. To switch OFF the equipment, move
the On/Off switch to position “0” (Off).
Disconnect the power cord from the
mains.
5. Run the attached air tool until no
compressed air remains in the hose.
2. OPERATION
OPERATION
IMPORTANT!:
WHEN RELEASING THE QUICK-RELEASE
COUPLING, BE SURE TO HOLD THE COUPLING PIECE
TO PROTECT YOURSELF AGAINST INJURY FROM THE
REBOUNDING HOSE.
IMPORTANT!:
BEFORE CONNECTING OR DISCONNECTING
ACCESSORIES, ALWAYS MAKE SURE THAT THE
COMPRESSOR IS OFF.
WARNING!:
COMPRESSED AIR CAN BE A
DANGEROUS FORM OF ENERGY. GREAT CARE IS
REQUIRED WHEN USING THE COMPRESSOR AND ITS
ACCESSORIES.
