0
25
50
75
100
125
150
0
(1)00
(3)00
(5)00
(7)00
(9)00
2
4
6
8
10
Lb/in²
(PSI)
kPA
(BAR)
PRESSURE GAUGE
kg/cm²
0
25
50
75
100
125
150
0
(1)00
(3)00
(5)00
(7)00
(9)00
2
4
6
8
10
Lb/in²
(PSI)
kPA
(BAR)
PRESSURE GAUGE
kg/cm²
AIR COMPRESSOR
2.0HP 40L
1. Motor
2. On/Off Switch
3. Pressure Regulator
4. Carry Handle
5. Regulated Pressure Outlet
6. Regulated Pressure Gauge
7. Support Foot
8. Drain Valve
9. Pressure Tank
10. Wheel
11. Tank Handle
12. Tank Pressure Gauge
AIR COMPRESSOR
KNOW YOUR PRODUCT
1. ASSEMBLY
SETUP & PREPARATION
1
2
3
4
5
6
7
8
10
11
9
12
ONLINE MANUAL
Scan this QR Code with your mobile
device to take you to the online manual.
Pre-Setup Checks
• Examine the machine for signs of transit damage. If damaged,
do not use, return to place of purchase
• The compressor should be set up near to the user.
• Avoid long air lines and long supply lines (extensions).
• Make sure the intake air is dry and dust-free.
• Do not set up the compressor in damp or wet rooms. The
compressor is designed to be used in dry rooms. It is prohibited
to use the compressor in areas where work is conducted with
sprayed water.
• Before you use the machine, make sure that the mains voltage
complies with the specifications on the rating plate.
• The compressor may only be used in suitable areas (with good
ventilation. There must be no dust, acids, vapours, explosive or
flammable gases in the room.
WARNING!
ENSURE THE TOOL IS TURNED OFF AND
DISCONNECTED FROM THE POWER SUPPLY BEFORE
PERFORMING ANY OF THE FOLLOWING OPERATIONS.
