Adjusting the Vertical Angle:
1. In addition to the Oscillating feature, the Ozeri Air Circulator can also be
adjusted from 0 to 90 degrees vertically.
2. To adjust the vertical angle of airflow, first ensure that the fan is Off
(knob should be pointed to the 0 position).
3. Gently hold the base down with one hand, and with the hand tilt the
fan upwards to your desired position.
4. Do avoid injury, do not attempt to adjust the vertical angle while the
fan is On.
Wall Mounting:
1. Find and mark two circles on the wall where the fan will be
mounted. The circles need to be 4 ¾” apart from center to
center. The circle size should be 3/8” in diameter.
2. Drill #8 screws into the wall (screws are not included). Use
drywall anchors if a stud is not available.
3. Leave about 3/8” of each screw exposed.
4. Line up the opening at the base of the fan with the screws
and hang the fan on the wall.
WARNING: DO NOT HANG OR MOUNT THIS FAN ON CEILING. DO
NOT OPERATING THIS FAN IN OSCILLATOIN MODE WHEN IT IS WALL-
MOUNTED.
6
