background image

Important Safety Instructions

Thank you for purchasing the Ozeri Tabletop Air Circulator. This product 

has passed extensive quality assurance tests for residential use. Every 

care has been taken to ensure that it reaches you in perfect condition. 

Warning: When using electric appliances, basic safety precautions 

should be followed to reduce the risk of fire, electric shock and 

personal injury, including (but not limited to) the following:

Read all these instructions before attempting to operate this product 

and save these instructions for future reference:

l

 THIS FAN HAS A POLARIZED PLUG (ONE BLADE IS WIDER THAN THE 

OTHER). TO REDUCE THE RISK OF ELECTRICAL SHOCK, THIS PLUG IS 

INTENED TO FIT IN A POLARIZED UTLET ONLY ONE WAY. MATCH THE 

WIDE BLADE OF PLUG TO THE WIDE SLOT OF THE OUTLET. FULLY 

INSERT. IF THE PLUG DOES NOT FIT FULLY IN THE OUTLET, REVERSE THE 

PLUG. IF IT STILL DOES NOT FIT, CONTACT A QUALIFIED ELECTRICIAN. 

DO NOT ATTEMPT TO BYPASS THIS SAFETY FEATURE. 

l

 NOTE: THIS FAN IS EQUIPPED WITH A FUSE. ALWAYS UNPLUG 

THE FAN BEFORE REPLACING FUSES. IF THIS FAN LOSES POWER 

AND YOU SUSPECT THE FUSE IN THE PLUG HAS BLOWN, UNPLUG 

THE FAN, THEN SLIDE THE FUSE DOOR FOUND ON THE SIDE 

OF THE PLUG TO THE OPEN POSITION. SLIDE THE FUSE DOOR 

OUTWARD UNTIL THE BLOWN FUSE IS FULLY VISIBLE. REMOVE 

THE BLOWN FUSE AND SNAP THE REPLACEMENT FUSE INTO 

PLACE. FULLY CLOSE THE FUSE DOOR. ONLY REPLACE WITH A 

FUSE RATED AT 2.5 – 5 AMPS, 125 VOLTS.

l

 Use this fan only as described in this manual. 

l  

Check the voltage indicated on the rating plate. This fan is designed 

for a 120V-60Hz electric supply. Make certain the power source 

conforms to these electric requirements. Make sure the room where  

this fan will be used has a working smoke detector.

2

Summary of Contents for Brezza OZF2









Reviews: