background image

                                                                                      -

1-

                                                                                   

 

Automatic Battery Charger 

Switching mode with Micro-controlled 

Input:220-260Vac / Output: 12Volt DC 

 

User’s Manual and Important Safety Information         

Model: OC-SW121080 / OC-SW121160 / OC-SW121210 

 

FEATURES 

 
Congratulations on purchasing an OzCharge Automatic / Switching Mode Battery Charger. 
OzCharge Battery Chargers comprise of the latest technology and they incorporate the following features:   
 

  High frequency Switching Mode / Full time pulse charge output 

 Microprocessor 

controlled 

  Multi charging rate - Selectable 

  Suits Lead Acid Battery Types: Calcium, Conventional, Sealed, WET, GEL - Selectable 

  Battery rejuvenation (De-Sulphation) function - Selectable 

  Manual Battery Equalisation mode - Selectable 

 Heavy-duty 

cables 

  Designed for Australian & New Zealand Conditions. 

 
 

  - - - - - - - - - - - - - - - - - - - WARNING - - - - - - - - - - - - - - - - - - - - - 

 

 

  This charger is designed for indoor use only and should never be exposed to rain. 

  Make sure you are using proper AC line power voltage. 

  Do not attempt to use the charger if it has been dropped or damaged. 

  Never attempt to charge a damaged battery, frozen battery or non-rechargeable battery. 

  Do not use the charger in a closed area or poorly-ventilated area. 

  Never smoke, use an open flame, or create sparks near a battery or charger during charging operation as 

this may cause an explosion / explosive gas. 

  Do not operate the charger if the cord or plug is damaged. 

  Do not disassemble the charger. Take it to a qualified person if a repair is required.   

  Keep the charger away from infants, children and pets. 

  Switch off the mains power supply before connecting or disconnecting the unit to a Battery. 

 

CAUTIONS

 

 

  Refer to the battery Manufacture’s specific recommended values to determine your Battery Type and for 

setting the charging rate.   

  Incorrect Battery Type Selection may result in you Battery being under charged or over charged. 

  Check the Battery Manufacture’s specific precautions - such as removing or not removing cell caps whilst 

charging. 

  Please ensure the correct Battery Type is selected. Do not charge using an incorrect Battery Type Setting. 

(For example, do not charge a Gel battery with Calcium battery selection setting as this may damage your 
battery) 

  Someone should be within range of your voice or close enough to come to your aid if working near a 

lead-acid battery. 

  Wear protective goggles and turn your face away when connecting or disconnecting a battery. 

  If battery acid contacts your skin or clothing, wash immediately with soap and water. If acid enters your eye, 

immediately flush the eye with running cold water for at least 10 minutes and seek medical attention 
immediately. 

  To reduce risk of damaging the Battery, avoid dropping any metal tools onto the battery.   

  Never rest the Battery being charged on top of your OzCharge Battery Charger. 

  The Battery Charger should be kept as far away from the Battery as the output cables permit. 

 

If using Generator power, please use a Surge Protector to protect the battery charger from high 
Voltage Spikes. 

 

 

Summary of Contents for OC-SW121080









Reviews: