-
4-
●
Absorption:
This stage charges the battery using a constant voltage providing that the Battery
Voltage is over 85%. The Charging Voltage for this stage is determined by the
Battery type selection: GEL-14.1V; Sealed/WET-14.4V; Calcium-14.7V.
(Indicated by the Absorption Green LED ON)
●
Equalising:
This stage begins automatically if the Calcium Battery type has been selected.
This cycle pushes the charge voltage up to an equalising level of 16.2V.
For further details and Manual equalisation options, please refer to page #5.
(Indicated by the Absorption Green LED Flashing)
●
Analysis:
Diagnoses the battery condition for ten minutes. If the Full LED is flashing, this
indicates that the battery is still less than 12.5V after the absorption mode and that
there is a fault with the battery
(Indicated by the Green FULL LED Flashing)
●
Full / Float:
Battery is fully charged and is ready for use. It will be maintained at a safe
constant
voltage.
Battery type selection: GEL-13.8V; Sealed/WET-13.8V; Calcium-13.8V.
(Indicated by the Green Full LED ON)
Rejuvenation Process (EXTEND YOUR BATTERY LIFE)
Your OzCharge Battery Charger provides a battery rejuvenation function.
What does this feature do?? -
Rejuvenation has been proven to break down the crystalline form of lead
sulphate within the battery cells which helps extend your battery life.
We recommend that you periodically use this rejuvenation (De-Sulphate) feature to ensure you get the
maximum life out of your battery.
To activate this rejuvenation feature, simply press and hold the ‘Equalisation’ Button for 3 Seconds until the
Rejuvenation LED begins flashing (YELLOW).
Once the charger has entered the rejuvenation (de-sulphate) charging stage, the process will automatically
time out after 24 hours or you can manually stop this process at any time by pressing and holding down the
‘Equalisation’ Button for 3 seconds.
