Safety instructions
In order to ensure that your Vision system works properly, you must
ensure that it is correctly connected to the ignition of your vehicle
(see Installation Instructions).
When it is correctly installed, the antenna automatically returns to the park positi-
on when the ignition is switched on and locks itself there. If the system cannot fully
retract or cannot retract at all due to a fault, then it is your responsibility as the
driver of the vehicle to check that the antenna is safely and properly stowed.
The driver of the vehicle must inspect the external unit before driving
off to ensure that it is fully retracted.
Please note also that different legal requirements apply to the operation of electri-
cal and electronic equipment in different countries. As the user of this equipment,
you yourself are responsible for ensuring compliance with the relevant laws and
regulations.
Your Vision system is approved by the manufacturer for connection to standard
commercially available rechargeable lead batteries with a rated voltage of
12V/24V DC and a rated capacity of at least 50Ah.
Connection to any other type of battery system can lead to irreparable damage
to the battery system or the Vision system or to the release of fl ammable or toxic
gases or to the self-ignition of the unsuitable battery system.
The manufacturer accepts no liability for direct or indirect damage or for conse-
quential damage to the system itself, to battery systems, motor vehicles or other
equipment or goods resulting from the connection of unsuitable battery systems or
installation/wiring errors.
5
