background image

11/12

Instructions

Safety Guidelines

INSTALLATION

  5

Step 2: Place the child seat  on  

the  ISOFIX   base 

rearward-facing and make sure  

the basket is connected to the 

base and the lock is green.

see 

4.8

Step 3:Keep the basket in a 

stable position. Hold basket 

handles adjust buttons with 

hands. At the same time, press 

down the basket handle and 

make it against  the backrest of 

the car seat  . 

Instructions

Safety Guidelines

756

439

701

Name

Quantity

Child seat

1

Instruction manual

1

Distance from front to back 

of the seat

 (depth)

756mm

 

Distance from left to right of 

the seat

 (width)

439mm

Height  of the seat

701mm

 

Weight of the seat

11kg

30

Do not bleach

Do not tumble dry

Do not iron

Hand wash, 

below 30

6.1 Daily maintenance

In daily use, check periodically the child seat for defects. The child seat should be replaced after an accident.

Please keep this child seat in dry and ventilated place .

If the child seat belts become dirty,clean the belts and the plastic components by wiping them with a damp sponge 

and allow dry naturally.

If food or drink contaminate the buckle, disassemble the seat belt from the child seat and rinse it gently with warm 

water.  Allow to dry naturally

 .

For cleaning the entire child seat fabric cover,please refer to the 6.2 washing instruction.
6.2 Washing instruction

Never use any solvant, chemical detergent or lubricant on any part of your child seat.

6.3 

To r

emove

 and refit

 the fabric cover

Open the buckle and take off the shoulder pads

 and crotch pad and remove head cushion

.

Unthread the harness shoulder straps and the crotch strap 

 .

Remove the fabric cover of the child seat.

 

To 

refit

 the fabric cover, please 

reverse the removal instructions

.

Model:  Oyster C

apsule

 Infant.  

NO:  LB/BBC- 328i- en- 01A

6

 

7

 

8

 

 (Install with ISOFIX anchorages with support leg)

MAINTENANCE & CLEANING

CONTENTS

WEIGHT & DIMENSIONS

Summary of Contents for Capsule Infant









Reviews: