01/02
Instructions
Safety Guidelines
This is an i-Size child car seat, ,commonly known as a
baby carrier
/baby car seat/ Infant carrier
.
This infant
carrier can be used together with a stroller (check
compatibility before use) to create a travel system. A
child should not spend more that 2 hours in the car seat/
infant carrier at one time, that includes time in the car and
when the seat is used as a travel system (as a stroller).
The safest way for babies to sleep is on their backs - as
recommended by experts at the Lullaby Trust.
This child seat can only be used with the
integral
Y-
shaped belt
(harness)
for children. It is suitable for
children up to a height of 83cm and a maximum weight to
13 kg.
Never overload the child seat more than one child
or with other loads.
2
3
For your child’s safety,
please read these instructions
carefully before us
e
and keep them for future reference.
Failure to follow the instructions contained in this manual
could result in serious injury to your child.
1
Y-shaped belt
shoulder pad
Buckle
Crotch pad
Handle
Shoulder strap slot
Comfortable cushion
Adjuster
（under the cover）
Y-shaped belt adjuster
strap
belt guide hook
Belt guide hook
Handle adjusting button
For ISOFIX installation: Make sure you read the car
manufacturer’s handbook.
Do not use any load bearing contact points other than those
described in the instructions and marked in the child restraint
for infant carrier module without ISOFIX base.
Any straps
holding the restraint to the vehicle should be tight.
Any straps restraining the child should be adjusted to the
child’s body, and that straps should not be twisted.
Any support-leg should be in contact with the vehicle floor.
Make sure any strap is worn low down,so that the pelvis is
firmly engaged, shall be stressed.
The child seat should be replaced when it has been subject
to violent stresses in an accident.
It is dangerous to make any alterations or additions to the
device without the approval of the Type Approval Authority,
not following closely the installation instructions provided by
the child restraint manufacturer is also dangerous.
The child seat should be kept away from sunlight if the seat
is not provided with a textile cover, otherwise it may be too
hot for the child’s skin
, exposed plastic surfaces can become
very hot in the sun.
Support leg
Support leg status window
Support leg
Isofix adjusting
button
Connecting status window
Locking button
Seat belt
adjustment button
Isofix release button
Isofix status window
PRODUCT OVERVIEW
adjusting button
FEATURES
SAFETY WARNINGS
