03/04
4
4.1 Installing position of the child seat in vehicle
4.2 Us
ing
the
buckle
, closing & opening
4.3 Check the height of harness
Rright
ISOFIX anchorages
Wrong
Rright installation
Step1:
Place
the left and the right pieces of buckle
(on the
shoulder straps)
together.
Step2:
Insert the two pieces into the
opening
of the
crotch
buckle at the same time. Hearing
a
"click"
means the buckle
is locked and connected
. Pull the
belts connected to
buckle
and check whether the buckle is locked correctly.
the buckle will eject and release
.
Do not
use rearward-facing in seating positions where
an active frontal airbag is installed.
Only install in this position if three-point safety belt
s
are
fitted.
If the height
of the harness
shoulder straps
not
correct
please adjust according to the following steps:
Step1: Press the red button of buckle, two pieces of
buckle will eject automatically
(see 4.2)
Step2:
Move
the seat belt adjustment
slider
to change
the position of
harness
shoulder belts .
1
1
2
3
Step 3:
To release the buckle, press in the red button and
Diagonal belt and Lap belt
seat belt adjustment
slider
Do not leave your child unattended in the seat at any time.
Any luggage or other objects liable to cause injuries in
the event of a collision shall be properly secured.
The Enhanced Child Restraint System shall not be used
without the cover.
The seat cover should not be replaced with any other than
the one recommended by the manufacturer,
because the
cover constitutes an integral part of the restraint performance.
Ensure that all components of the children's safety seat are
secured to the correct position during the daily use
of the vehicle, that they are not liable,during the
everyday use of the vehicle,to become trapped by a
moveable seat or in a door of the vehicle.
Please keep
this
instruction
manual
for
the
life
of the product
.
Do not use this child seat at home.
It has not been designed
for home use and should only be used in your car.
For the reason of safety,the child seat must be fixed inside
the vehicle using ISOFIX anchorages even if you do not put
your child inside the child seat.
Never use a second-hand product,as you can never be
certain what was happened to it.
This is an i-Size Enhanced Child Restraint System. It is
approved according to Regulation No.129, for use in, i-Size
compatible vehicles.
Instructions
Safety Guidelines
compatible vehicle seating positions as indicated by
vehiclemanufacturers in the vehicle users’ manual.If in
doubt, consult either the Enhanced Child Restraint System
manufacturer or the retailer.
Don't use the child seat in seating positions where there
is an active frontal airbag installed.
This infant carrier
not suitable for
a
car which is only equipped with 2 point safety belts.
When used as an infant carrier with ISOFIX base ,this type
of child safety seat is suitable for fixing into the seat
positions of the cars equipped with ISOFIX system that is
fitted in accordance with ECE R14.
When used as an infant carrier module without
an
ISOFIX
base, this type of child safety seat is suitable for a car
equipped with 3 point belts approved to ECE R16
Always check whether the Y-shaped belts are at the correct height for your child. If not ,
adjust
the height of
headrest
/harness using the adjustmentslider at the back of the seat
(see the picture
below
) .
USAGE
