2
Table of contents:
Page
1.
Before installation
3
2.
Recommendation
for
washing
3
3.
Installing
the
motor 3
4.
Installing
the
battery
unit
6
5.
Installing the pedal assist sensor
7
6. Fitting the LCD console
9
7. Installing the brake cut off switches
10
8.
Connecting
the
connectors 11
9.
Connecting brake lever & throttle to the LCD
12
This manual applies to the OXYDrive RC11Ah conversion kit.
PLEASE NOTE: Not all the illustrations may apply to your specific
kit. This is a DIY conversion kit and some illustrations may vary
from the actual product purchased. The entire concept of fitting is
the same on all kits. Also note that installation on various bikes
may vary and there may be a need to take an individual approach
for every bike conversion. OXYDrive does not take any liability for
the damages caused to the bike frames or any other bike
components. The conversion kits are fitted at owner’s risk.
