14
10.
Using the LCD display
Once the installation is completed please press the power button on the
battery. The battery power is on when GREEN lights are ON the on the
battery case.
In order to turn on the display press power button on the display for 1-2
seconds. The display will power on and will need approx 3 seconds to load
up all functions.
Both displays C300 and C6 show variety of functions including speed,
power level, level of pedal assist, level of load or even voltage on battery
(C6 only).
With button set you can change the functions such as ODO, TRIP 1, TRIP
With buttons up and down you can change the level of pedal assist mode.
MODE 0 – no assit
MODE 1 – the weakest pedal assit
…
MODE 6 – the most powerful and fastest mode at the same time
RE-SETTING THE DAILY TRIP
You need to press SET for 3 seconds, then press SET button once again
until in mode figure will change from 0 to 1, then press UP or DOWN
button and this will reset daily distance.
CHOOSING ACCELERATION MODE
OXYDrive allows to choose one of the three acceleration modes, POWER,
MID and ECO. Press SET for 3 seconds, then with up or down button you
can choose from of the three power modes.
Please note that this setting does not affect speed but only acceleration
SETTING THE WHEEL SIZE
Press SET button for 3 seconds, then press SET again two more times so
the mode figure will change from 0 to 2, then with up or down button you
can select required wheel size.
CHANGING KM/H to MPH
Press SET for 3 seconds, then press SET again 3 times so the mode figure
changes from 0 to 3, then with up or DOWN button you can change km/h
to mph.
EXIT FROM SETTINGS MODE
Once being in settings mode do not touch any buttons for 3 seconds, this
will exit settings mode automatically.
RESTRICTING/ DERESTRICTING the throttle from 6km/h to full
speed
