OXO [T]Box RDM, User Instruction

Page: 13 / 30

You can set these values of 10 channels ( 001 -- 010 ).For example, set the value for channel
1. Locate the cursor to the desired channel, press the Dial wheel to select it.Then turning
the Dial wheel to adjust the level. When satisfying the adjustment, press the Dial wheel
again to confirm the settings.
You may also adjust the other 502 channels levels. Locate the cursor to > at the first line of
LCD,press the Dial wheel and turn it to the desired channels for new settings. Remember
that there are only 10 continual channels available for your choices every time.
If you would like to set these 512 channels to be 000, use the Clear All function by pressing
the > at the fourth line.
< 512 Channel
Modify = Each
Channel will hold
its preset value
Turn the Dial wheel to select option. You can adjust the speed, channel,
mode, level for your requirements when applying this function. The speed value can be
increased from 1 to 10. And there are 5 modes for reference, including Fade Only, Fade Fine,
Auto On/ Off, Ramping, Stop.
Fade Only: Changing the channel value by Dial Wheel in the range of 0~255.
Fade Fine: Based on the initial channel value of Fade Only , turn the dial wheel can
increase the value one by one. When the increment value is 31, turn the dial wheel
will change the channel value into the initial value.
Auto On/Off: The channel value will be changed between 000 and 255, complying with the
speed.
Ramping: The channel value will steadily increase one by one till to 255, complying with
the speed. Then repeat the sequence of 0 to 255.
Stop : The channel value can not be changed and held.
The LCD window usually shows the following diagram.
Single Channel
2. Single Channel
< Auto Speed : 01 > ?
Chan : 001 >
Mode: Fade Only >
Level : 000 = 000% >
Locate the label ? for more details. Help information shows as follows.
User's Instruction
Page 13
[T]Box-RDM