OXO [T]Box RDM, User Instruction

Page: 15 / 30

4. Run Cues ( Scenes )
< 4. Run Cues(Scenes) ?
Running Cue : 1
End Cue :
99 >
Speed rate : 01 >
Default End Cue number
Default Speed rate
< 4. Run Cues(Scenes) ?
From cue 1 to the
end cue conrinually
in speed rate
< RDM Control
1. DISC_COMMAND >
2. GET or
SET COMMAND >
Turn the Dial wheel to select and then press the Dial wheel to access this menu
function. There are 2 sub-menu options, including DISC COMMAND, GET or SET COMMAND
mode.The LCD window usually shows as follows:
RDM Control
RDM Control
Turning the Dial wheel to select , you can transmit cues continually
at a specific rate. When accessing this option, the LCD window shows the following diagram.
Run Cues( Scenes )
The default start cue is cue 1. You can adjust the end cue No. and speed rate ( 1 -10 ) by
Dial wheel.
For more information, press ? for help.
User's Instruction
Page 15
In the RDM system the RDM function of [T]BOX-RDM was used as a controller. 1)
For the 2 sub-menus of RDM control, you can carry out "SET or SET COMMAND" only you
successfully performed "DISC_COMMAND " first. 2)
[T]Box-RDM