OXO [T]Box RDM, User Instruction

Page: 22 / 30

< 2. TX 2048 Channel
Channel:[0001-0010] >
000 000 000 000 000
000 000 000 000 000
< Auto Speed : 01 >
Chan: 0003 >
Mode: Fader Only >
Level: 000=000%
>
User's Instruction
Star Channel:0001 >
--- --- --- --- ---
--- --- --- --- ---
< DMX-1000K Mode ?
At this, all init
buffer is zero.
Bandrate is 1000Khz.
< 1. RX Channel: 0000
Turn and press the Dial wheel to access "?" for help, the LCD window shows you as follows:
Turn and press the Dial wheel to access DMX-1000K RX. The LCD window shows you as
follows and you can use the dial wheel to set the start channel.
1. DMX-1000K RX
Turn and press the Dial wheel to access DMX-1000K TX 2048. The LCD window shows you as
follows and you can use the dial wheel to set the channel value.
2. DMX-1000K TX 2048
Turn and press the Dial wheel to access TX Single Chanl. The LCD window shows you as
follows and you can use the dial wheel to set the corresponding value.
3. TX Single Chanl
The Auto Speed can be set in the sort of 1~10.
Chan(Channel): There is only one channel level varied from the other 2047
channels levels. And the other 2047 channels levels are zero. Or, you can set the
channel level as " 001 - 512 ( all ) ", so all the 512 channels will have the same
value.
The Mode can be set as Fade Only, Auto on/off or Ramping.
The Level can be set in the range of 1~255 which was expressed as the mode of
"Decimalism----Percent "or "Hex----Percent".
Decimalism or Hex Percent
Page 22
[T]Box-RDM