Owon OWP H Series, User Manual

Page: 34 / 34

29
range
Not Be Set To '0' The input value
cannot be ‘0’
Input valid value.
Passward Error Incorrect password
input Input the correct password, if you forget
the password, call our company.
Unset Volt Ref The output cannot
be
open without
setting the voltage
reference
Set the voltage reference and start the
output.
Unset Curr Ref The output cannot
be
open without
setting the current
reference
Set the current reference and start the
output.
Unset Power Ref The output cannot
be
open without
setting the power
reference
Set the power reference and start the
output.
Illegal Data Saving a data group
is invalid Save the data group after setting it
correctly.
Full Data Space 128 data groups are
full Delete redundant data groups and save
them.
No Dada The precall data
group is empty Call data after saving the corresponding
data group.
AddrRange :1~247 Invalid MODBUS
address
Input valid address
Func Code Err
Communication
error
Invalid function code Operate according to the communication
protocol;
RegisterAddrErr Invalid register
address
Operate according to the communication
protocol;
Data Range Err Illegal data Operate according to the communication
protocol;
Local Mode Err The device is in local
control mode Switch to remote mode