Owon OWP H Series, User Manual

Page: 14 / 34

9

Step number: The number of single step(range: 1 to 50) contained in a complete
cycle;

Cycle number: The number of loops that perform one full step at a time;

Single-step setting: Each step outputs the contained the reference, duration, and
mode selection content (The hybrid mode only);
Figure 10: Step Mode
3.1.2 Charge Mode
Charging Mode: Disable
▼
Num Of Steps: 3 Steps
Step Delay: XXXXX mS
▼
Dry Contact Control: Disable
▼
Num Of Cycles: Infinite
Step1: Volt Reference: XX.XXX V
Curr Reference: XX.XXX A
Judgment Volt
：
XX.XXX V
Judgment Curr
：
XX.XXX A
Charging Curr
：
XXXXX S
▼
Charging Time
：
XXXXX S
▼
Table 5: Charge Mode
Charging mode parameters
：

Charging mode: Whether to enable charging mode;

Step number: The number of single step(range: 1 to 10) contained in a complete
cycle;