Owon HDS-N series, User Manual, Page: 64 / 88

OWON HDS-N Series Handheld DSO & DMM 8-Advanced Function of Oscilloscope
To make a voltage measurement on CH1, doing the following:
1. Press the MENU key and the function menus are displayed at the right of the screen.
2. Press the MENU ▲ or MENU ▼ key to select CURS MEAS . Five options are shown at the
bottom of the screen.
3. Press F1 key to select the measurement type Voltage . Two purple crossing dashed lines V1
and V2 are shown on the screen.
4. Press the F2 key to select the measured channel CH1 .
5.
Press OPTION and display as
— Cursor 1
—
Cursor 2
When setting OPTION ▲ or OPTION ▼ , V2 will move up and down and the relating
voltage value to the zero position of Channel 1 will show at the bottom of the screen.
Setting OPTION ◄ or OPTION ►
,
V1 will move up and down and the relating voltage
value to the zero position of Channel 1 will show at the bottom of the screen, at the same
time the increment shows the absolute value of V1-V2 shown as Fig 52:
Figure 52: Use the Cursor for a Voltage Measurement
When log out submenu, every value will show on the right bottom of the screen as figure 53:
58