manualshive.com logo in svg

Owon HDS-N series, User Manual, Page: 5 / 88

Share
Download
Owon HDS-N series User Manual Download Page 5

OWON HDS-N Series Handheld DSO & DMM                                                              Contents 

6.13 Using Persistence to Display Waveforms ············································································22

 

6.14 Using Peak Detection to Display Glitches ···········································································23

 

6.15 Selecting AC-coupling···········································································································24

 

6.16 Reversing the Polarity of the Displayed Waveform ···························································25

 

6.17 Using Waveform Mathematics Functions···········································································26

 

6.18 Use USB mass storage device to save waveform data ························································27

 

7. USING THE MULTIMETER

······························································28

 

7.1 About this Chapter··················································································································28

 

7.2 Making Meter Connections····································································································28

 

7.3 Multimeter Operation Window ·····························································································28

 

7.4 Making Multimeter Measurements ·······················································································29

 

7.4.1 Measuring Resistance Values

·····················································································29 

7.4.2 Measuring Diode

··········································································································30 

7.4.3 On-off Test

·····················································································································31 

7.4.4 Measuring Capacitance

·······························································································31 

7.4.5 Measuring DC Voltage

·································································································32 

7.4.6 Measuring AC Voltage

·································································································33 

7.4.7 Measuring DC Current

·································································································34 

7.4.8 Measuring AC Current

·································································································35 

7.5 Freezing the Readings·············································································································36

 

7.6 Taking a Relative Measurement·····························································································37

 

7.7 Selecting Automatic/ManualRange Adjustment···································································38

 

8. ADVANCED FUNCTION OF OSCILLOSCOPE

··························39

 

8.1 About this Chapter··················································································································39

 

8.2 Setting the Vertical CH1 and CH2·························································································39

 

8.2.1 Setting the Channel Coupling

·····················································································40 

8.2.2 Open and Close Settings on Channel

·······································································41 

8.2.3 Setting the probe attenuation

······················································································41 

8.2.4 Setting of Inverted Waveform

·····················································································42 

8.3 Make the Math Function Menu Setting ················································································42

 

8.4 Setting the Trigger System······································································································43

 

8.5 Triggering Control ··················································································································44

 

8.5.1 Edge Trigger

·················································································································44 

8.5.2 Video Trigger

·················································································································45 

8.5.3 

Alternate trigger··············································································································47 

8.6 Selecting the acquisition mode ·······························································································49

 

8.7 Display Setting·························································································································50

 

8.7.1 Display Style

·················································································································50 

8.7.2 Persistence

···················································································································51 

8.7.3 XY Mode

························································································································51 

8.7.4 Cymometer

····················································································································52 

   

5

Summary of Contents for HDS-N series

























































































Reviews:

No comments