OWON HDS-N Series Handheld DSO & DMM 7-Using the Multimeter
2.
Insert the black lead into the
COM
banana jack input and the red lead into the
V/
Ω
/C
banana jack input.
3.
Connect the red and black test leads to the resistor. The resistor value readings are shown on
the screen in Ohm.
Now, you can see a screen that looks like the following figure 21.
Figure 21: Resistance Measurement
7.4.2 Measuring Diode
To make a measurement on the diode, do the following:
1. Press
the
R
key and
R
appears at the top of the screen.
2. Press
SET
key until the following is displayed on the screen
.
3.
Insert the black lead into the
COM
banana jack input and the red lead into the
V/
Ω
/C
banana jack input.
4.
Connect the red and black leads to the resistor and the diode resistor readings are displayed
on the screen in
V
.
Now, you can see a screen that looks like the following figure 22.
30