Page 11
Take the L shaped PCI card deadplate you removed on page #7. Starting at the top of
the fan shroud, work the short end of the bracket into the gap at the back of the Mac
Pro, as shown above.
Once the bracket is inserted, you can use it as a hook to help pull the fan assembly
out of the Mac Pro. Place the bracket at the bottom left like shown here. Start putting
gentle force on the bracket, pulling on it. Then....
Using your right hand, wiggle, tug, and pull the entire fan assembly out of the com-
puter. It attaches to the logic board via a connector that you don’t need to worry about
disconnecting, it’s a pressure fit.
End of Mac Pro 667MHz Install. Please Turn to page #15
