OWANDY RX - HUMAN VERSION
OWANDY RX - HUMAN VERSION
Page 26 of 61
OPERATOR’S MANUAL • Owandy-RX DC • 02/2020 • NXDCEN160A
Operator’s manual – Owandy-RX DC
BITE-WING EXAM
The LED of the selected type of test should be turned on
LED
ANT ON
radiographic system is set for anterior bite-wing exam
LED
POST ON
radiographic system is set for posterior bite-wing exam
to change the selection press the key relative to the desired exam
3° - POSITIONING THE PATIENT
Position the patient following the standard intraoral procedures.
4° - POSITIONING FILM or SENSOR
Position either the fi lm or the digital sensor depending on the technique to be used.
5° - POSITIONING CONE
Follow the standard intra-oral procedures to position the cone.
6° - CHECK ON THE DISPLAY THE SELECTED TIME
Before proceeding with the exposure, check on the display the selected time
to change the selection press the following keys
!
WARNING
This modifi cation brought to the exposure time is momentary and it will be lost unless it is saved. (refer to Chapter 6) To restore the previous
values, press one of the keys with the LED turned off on the control panel.
7° - MAKE THE EXPOSURE
1. Take the control button of the timer relevant to the selected tubehead and keep a safety distance (at least 2 meters)
from the tubehead, in order to be able to constantly check the radiographic exposure
2. Advise the patient to remain still
3. On the control button press the
X-ray key and keep it pressed until the acoustic signal (beep) stops
and LED yellow turns off
