OVS 16CH-P8 Quick Operation Manual Download Page 64

Page: 64 / 240

User Manual of 87XX-P Series NVR

Figure 3. 4

Image Settings- Customize

Live View Strategy can be selected to set strategy, including Real-time, Balanced, Fluency.

Figure 3. 5

Live View Strategy

3.3

Adjusting Live View Settings

Purpose:

Live View settings can be customized according to different needs. You can configure the output interface, dwell

time for screen to be shown, mute or turning on the audio, the screen number for each channel, etc.

Steps:

Enter the Live View Settings interface.

Menu> Configuration> Live View

Figure 3. 6

Live View-General

The settings available in this menu include:

•

Video Output Interface:

Designates the output to configure the settings for. Outputs include VGA/HDMI.

•

Live View Mode:

Designates the display mode to be used for Live View.

•

Dwell Time:

The time in seconds to

dwell

between switching of channels when enabling auto-switch in Live

User Manual

Summary of Contents for 16CH-P8

















































































































































































































































Search results

Summary of Contents for 16CH-P8

Reviews:

OVS 16CH-P8, Quick Operation Manual, Page: 64 / 240

Search results

Summary of Contents for 16CH-P8

Reviews: