OVS 16CH-P8 Quick Operation Manual Download Page 127

Page: 127 / 240

User Manual of 87XX-P Series NVR

104

Figure 7. 15

Export Finished

Check backup result.

Note:

The Player player.exe will be exported automatically during record file export.

Figure 7. 16

Checkup of Event Export Result Using USB Flash Drive

7.1.4

Backing up Video Clips

Purpose:

You may also select video clips to export directly during Playback, using USB devices (USB flash drives, USB HDDs,

USB writer), or DVD-R/W.

Steps:

Enter Playback interface and play back the record file you want to set video clips.

Please refer to

Chapter 6.1 Playing Back Record Files

During playback, use buttons

and

in the playback toolbar to start or stop clipping record file(s).

Quit Playback interface after finishing clipping and you will then be prompted to save the clips.

Note:

A maximum of 30 clips can be selected for each channel.

User Manual

Summary of Contents for 16CH-P8

















































































































































































































































Search results

Summary of Contents for 16CH-P8

Reviews:

OVS 16CH-P8, Quick Operation Manual, Page: 127 / 240

Search results

Summary of Contents for 16CH-P8

Reviews: