OVS 16CH-P8 Quick Operation Manual Download Page 212

Page: 212 / 240

User Manual of 87XX-P Series NVR

189

14.3

Importing/Exporting Configuration Files

Purpose:

The configuration files of the NVR can be exported to local device for backup; and the configuration files of one

NVR can be imported to multiple NVR devices if they are to be configured with the same parameters.

Steps:

Enter the Import/Export Configuration File interface.

Menu > Maintenance >Import/Export

Figure 14. 20

Import/Export Config File

Click the

Export

button to export configuration files to the selected local backup device.

To import a configuration file, select the file from the selected backup device and click the

Import

button.

After the import process is completed, you must reboot the NVR.

Note:

After having finished the import of configuration files, the device will reboot automatically.

User Manual

Summary of Contents for 16CH-P8

















































































































































































































































Search results

Summary of Contents for 16CH-P8

Reviews:

OVS 16CH-P8, Quick Operation Manual, Page: 212 / 240

Search results

Summary of Contents for 16CH-P8

Reviews: