OVS 16CH-P8 Quick Operation Manual Download Page 20

Page: 20 / 240

Quick Operation Guide of 8700-P Series NVR

Accessing by Web Browser

Logging In

If the device has successfully connected to the network, you can get access to the device via web browser. Open

web browser, input the IP address of the device and then press Enter. The login interface appears.

Input the user name and password, and click the Login button.

Notes:

The default IP address is 192.0.0.64.

The default user name is admin, and password is 12345.

You may use one of the following listed web browsers: Internet Explorer 6.0, Internet Explorer 7.0, Internet

Explorer 8.0, Internet Explorer 9.0, Internet Explorer 10.0, Apple Safari, Mozilla Firefox, and Google Chrome.

The supported resolutions include 1024*768 and above.

When you log in for the first time, the system will remind you to install the Plug-in control. After the installation,

you can configure and manage the device remotely.

Live View

The live view interface appears by default when you log in the device.

Interface Introduction

①

Camera List: Displays the list of cameras and the playing and recording status of each camera.

②

Live View Window: Displays the image of camera, and multi-window division is supported.

③

Play Control Bar: Play control operations are supported.

④

PTZ Control: Pan, tilt, zoom operations are supported, as well as preset editing and calling.

Note:

PTZ function can only be realized if the connected camera supports PTZ control.

⑤

Video Parameters Configuration: Brightness, contrast, saturation and other parameters of the image can be

modified.

Summary of Contents for 16CH-P8

















































































































































































































































Search results

Summary of Contents for 16CH-P8

Reviews:

OVS 16CH-P8, Quick Operation Manual, Page: 20 / 240

Search results

Summary of Contents for 16CH-P8

Reviews: