OVS 16CH-P8 Quick Operation Manual Download Page 102

Page: 102 / 240

User Manual of 87XX-P Series NVR

6.1.2

Playing Back by Time

Purpose:

Play back video files recorded in specified time duration. Multi-channel simultaneous playback and channel

switch are supported.

Steps:

Enter playback interface.

Menu>Playback

Check the checkbox of channel(s) in the channel list and then double-click to select a date on the calendar.

Figure 6. 5

Playback Calendar

Note:

If there are record files for that camera in that day, in the calendar, the icon for that day is displayed as

Otherwise it is displayed as

. And the selected date is surrounded by a white rectangle, which is

displayed as

In the Playback interface:

The toolbar in the bottom part of Playback interface can be used to control playing process, as shown in Figure 6.

Figure 6. 6

Interface of Playback by Time

User Manual

Summary of Contents for 16CH-P8

















































































































































































































































Search results

Summary of Contents for 16CH-P8

Reviews:

OVS 16CH-P8, Quick Operation Manual, Page: 102 / 240

Search results

Summary of Contents for 16CH-P8

Reviews: