background image

 

5.    NetWare Network 
 
5.1     System Architecture 

We implemented NetWare printer sharing functionality into the print 

server itself, thus allowing one or more printers attached by a print server 

to be connected to the network. We have developed the print server to 

support NetWare print server. 

Embedded print server, which emulates the “queue management 

functionality” of NetWare print server, PSERVER program running on the 

NetWare server. A user first prints a job at a workstation, the job is 

routed to a NetWare server, the NetWare server stores the job in a print 

queue and then the print server gets the print job from the queue to 

printers. 

Netware Server

Windows 98

Windows 2000

Print Queue

Print Server

 

Compare with NetWare printing functionality, the advantages of 

embedding the NetWare network printing functionality in the print server 

include: 

Installation is easier and quicker. 

Network management is easier. 

Printing performance is enhanced. 

Relieve NetWare file server’s burden. 

30 

Summary of Contents for AirLive WP-203G





































































































































Reviews: