Ovislink AirLive WP-203G User Manual Download Page 97

Page: 97 / 132

8.4.7 AppleTalk

AppleTalk is a data communication protocol often used by Macintoshes.

The print server can use these parameters to join the AppleTalk network

and share the printer to other AppleTalk workstations. You have to select

to enable or disable AppleTalk, and setup the “Zone Name” and “Printer

Type” for each printer port of this print server.

AppleTalk Enable

: Enable or disable “AppleTalk”.

AppleTalk Zone Name

: Print server has to join zones of AppleTalk

before it can be shared to other workstations. Only workstations in the

same zone can share the printer. If you want to share the printer to all

workstations in all Zones, you should enter only “*” in the “Zone Name”

field.

Printer Type

, the type of printer attached to each printer port. You can

get the printer type from the manufacturer of the printer.

Summary of Contents for AirLive WP-203G





































































































































Search results

Summary of Contents for AirLive WP-203G

Reviews:

Related manuals for AirLive WP-203G

Brands by name

Popular brands

Ovislink AirLive WP-203G, User Manual

Search results

Summary of Contents for AirLive WP-203G

Reviews:

Related manuals for AirLive WP-203G

Brands by name

Popular brands