Ovislink AirLive WP-203G User Manual Download Page 33

Page: 33 / 132

4.2 Windows NT/2000/2003 Server Installation and

Setup

Please follow the procedures described below for installation and

construct a peer-to-peer connection (PTPP) between Windows

NT/2000/2003 Server and Print Server.

Step1.

If this is your first time installing print server, please install the

administrator software on Windows NT/2000/2003 server first. Refer to

section 3.2 for installation instructions.

If your network has already installed a working print server and your

Windows NT/2000/2003 server has not yet installed the PTPP driver,

please install the client software. Refer to section 3.4 and 3.5 for

installation instructions.

Step2.

Please add/configure the Peer-to-Peer Printing of the Windows

NT/2000/2003 network printer and ve rify that you can print from

Windows NT/2000/2003 to the print server by the installed PTPP driver.

Step3.

Share the above server’s printer to the network by performing the standard

Windows printer sharing process.

Summary of Contents for AirLive WP-203G





































































































































Search results

Summary of Contents for AirLive WP-203G

Reviews:

Related manuals for AirLive WP-203G

Brands by name

Popular brands

Ovislink AirLive WP-203G, User Manual

Search results

Summary of Contents for AirLive WP-203G

Reviews:

Related manuals for AirLive WP-203G

Brands by name

Popular brands