Go to your smartphone’s Wi-Fi settings and search for “XBeeDrone2.0Racing-xxxxx” network. Then
establish the connection (no password needed).
Run the installed TOY LAB FPV app and tap “PLAY”.
The smar
tphone’s screen will show the live images from the drone’s camera.
TAKING PHOTOS AND SHOOTING VIDEOS USING THE DRONE’S CAMERA
Before recording videos or taking pictures, make sure that a micro SD memory card is properly installed in the
drone (the SD card slot is at the rear bottom part of the drone).
Short press the camera button to take a photo. The
drone's LEDs will blink once.
Press and hold the camera button to start recording.
The drone's LEDs will blink at regular intervals.
Press this button again to stop recording.
PROPELLER REPLACEMENT
In order to replace the propellers follow the steps shown in the schedule below (each propeller is marked A or
B):
All the pictures and information in the manual have been submitted for illustrative purposes only. Therefore, they may differ from the actual product.
The front side
of the drone
