TRANSMITTER AND RECEIVER SYNCHRONIZATION
Step 1
Place the battery in the drone's battery compartment
and connect the battery plug to the drone’s battery
slot.
Step 2
Turn the controller on.
Step 3
Place the drone on a flat and even surface.
Step 4
Engines calibration Place the drone on a flat and even
surface. Move the left and the right stick to the lower
left corner, as shown in the picture. Hold these
positions for 5 seconds. The drone's LEDs will blink
several times, and then they will start to glow steadily.
Now, you can release the sticks - the drone is ready to
fly.
REMEMBER TO CALIBRATE THE DEVICE
BEFORE EACH START. OTHERWISE THE UNIT
MAY NOT WORK PROPERLY.
FLIGHT CONTROL
Flying up / down
Move the throttle stick forward to fly the drone up.
Move the throttle stick backward to fly the drone
down.
Rotating left/ right
Move the throttle stick left / right to rotate the drone
in a given direction.
