Overmax Multipic 4.2, User Manual

Page: 21 / 78

EN
System settings
1.
In the main interface, select Settings and then System settings (B, fig.
11).
2.
In System settings, you can change the language and software version,
connect via Bluetooth, restore factory defaults and complete local or
online update (fig. 13).
3.
Local update: If you have the installation file to update the software to
the newer version, you can save it to the USB drive and complete the
update. Connect the external drive to the USB port and then follow the
instructions.
4. Online update: If you do not have the installation file, connect the
projector to the Wi-Fi network and then follow the instructions.
Projection settings
1.
In the main interface, select Settings and then Projection settings (C, fig.
11).
2.
Depending on the installation method and projector setting (see:
Projector installation methods), select one of the available picture
settings (fig. 14).
Connection via Bluetooth
1.
In the main interface, select Settings and then System settings (B, fig.
11).
2.
In System settings, select Bluetooth, scan for the available devices and
select the device to connect to (fig. 15).
Cleaning
1.
Before cleaning the device, disconnect the power cord.
2. Clean the enclosure on a regular basis, with a moist cloth and natural
cleaning products.
3.
To clean the projector lens, use the glasses cleaning cloth or soft fabric
to avoid scratches.
4.
Clean the ventilation slots and projector speakers using a brush on
a regular basis. Otherwise, ventilation may be blocked.
5.
Clean the slot under the dust cover (10, fig. B) on a regular basis (for
example with compressed air) to maintain good picture quality.
These pictures are for reference only, the actual appearance of the products
may differ from the pictures.