Overmax Multipic 4.2, User Manual

Page: 19 / 78

EN
3. Ceiling mount for rear projection.
4.
Placing the projector on a rear projection stand.
Warning:
The projector may be damaged if improperly mounted to the ceiling
or another surface.
• Only use the projector in a room, in which the temperature is in the range
of 5°C to 35°C. Otherwise, projector failure may occur.
• In a dusty, wet, damp or smoky room, projector failure may occur.
• Poor ventilation may cause overheating, which may cause damage to
the projector, as well as the risk of fire.
Standard setting
Place the projector on a solid and stable surface. Ventilation slots should
not be covered or blocked. Do not place any objects within about 30 cm of
ventilation openings.
To adjust the picture size and projector distance, refer to the following table
(fig. 4):
Aspect ratio 16:9
Picture size (in) Distance (m)
40 1.20
50 1.54
70 2.15
100 3.08
Set the input
Turn on the projector and then select the preferred input on the main interface
(fig. 5).
Multimedia
Connect the external drive to the USB port of the projector. In the menu, select
Multimedia, select the drive and then the file to display (fig. 6).
Connection to multimedia input using the wire
The projector may display the picture from many devices. Depending on your
device, use a suitable input in the rear of the enclosure.
1.
USB input – memory sticks, portable drives.
Note! The product does not support USB 3.0.