19
For the latest version of this document, please go to:
http://www.overlandstorage.com/pdfs/SnapServer_NAS_Config_Guide.pdf
©2014 Overland Storage. All trademarks and registered trademarks are the property of their respective owners. The information contained herein is subject to change without notice and is
provided “as is” without warranty of any kind. Overland Storage shall not be liable for technical or editorial errors or omissions contained herein.
SnapServer
®
DX Series Configuration Guide
Step 1
Choose and Configure aSnapServer DX1 System
Step 1a
Choose the SnapServer DX1 System
OV-‐NAS201001
SnapServer DX1, 0-‐DRIVE
OV-‐NASDX1-‐4TB
SnapServer DX1, 4TB Enterprise SATA (4 X 1TB)
OV-‐NASDX1-‐8TB
SnapServer DX1, 8TB Enterprise SATA (4 X 2TB)
OV-‐NASDX1-‐12TB
SnapServer DX1, 12TB Enterprise SATA (4 X 3TB)
OV-‐NASDX1-‐16TB
SnapServer DX1, 16TB Enterprise SATA 4 X 4TB)
Step 1b
To populate a SnapServer DX1 with internal capacity, choose up to 4 drives
SATA II Enterprise Drive 4-‐Packs (7200 RPM)
OV-‐ACC902008
HDD -‐ DX, 4TB SATA ENT w/Carrier, 4 Pack
OV-‐ACC902006
HDD -‐ DX, 3TB SATA ENT w/Carrier, 4 Pack
OV-‐ACC902004
HDD -‐ DX, 2TB SATA ENT w/Carrier, 4 Pack
OV-‐ACC902001
HDD -‐ DX, 1TB SATA ENT w/Carrier, 4 Pack
SATA II Enterprise Drive Single (7200 RPM)
OV-‐ACC902009
HDD -‐ DX, 4TB SATA ENT w/Carrier
OV-‐ACC902007
HDD -‐ DX, 3TB SATA ENT w/Carrier
OV-‐ACC902005
HDD -‐ DX, 2TB SATA ENT w/Carrier
OV-‐ACC902003
HDD -‐ DX, 1TB SATA ENT w/Carrier
SATA II Desktop Drive 4-‐Packs (Variable RPM)
OV-‐ACC902014 HDD -‐ DX1, 3TB SATA DT w/Carrier, 4 Pack
OV-‐ACC902012 HDD -‐ DX1, 2TB SATA DT w/Carrier, 4 Pack
OV-‐ACC902010 HDD -‐ DX1, 1TB SATA DT w/Carrier, 4 Pack
SATA II Desktop Drive Single (Variable RPM)
OV-‐ACC902015 HDD -‐ DX1, 3TB SATA DT w/Carrier
OV-‐ACC902013 HDD -‐ DX1, 2TB SATA DT w/Carrier
OV-‐ACC902011 HDD -‐ DX1, 1TB SATA DT w/Carrier
Step 1c
Select Additional Memory (if desired)
OV-‐ACC902022
ACC -‐ Memory Module, DX1, 2GB DIMM
NOTE:
SnapServer DX1 Systems are provided with 2GB (1 x 2GB) memory and have a total of 2 memory slots for a maximum memory
configuration of 4GB.
Step 1d
Add a Slide Rail Kit (if desired)
OV-‐ACC902024
ACC -‐ Slide Rail Kit, DX1
NOTE:
SnapServer DX1 systems include Fixed Rack Mount Brackets for 19” Cabinet Mounting; a Slide Rail Kit is only required if sliding the
system forward in the Rack is desired
Step 1e
Add the SAS HBA for connection to the SnapExpansion (if desired)
OV-‐ACC902021 ACC -‐ PCIe Card, DX, SAS HBA
NOTE:
SnapServer DX1 systems one PCIe expansion slot. The SAS HBA can be used to attached up to three SnapExpansion chassis or SAS attached
tape libraries or autoloaders.
Step 2
Add Snap EDR Software (as appropriate Express or Standard)
Step 3a
Snap EDR Express
5325302015
Snap EDR Express -‐ Workgroup
