28
– Realise piping of the fresh water station or use
piping set item no. 138 35 80.
– Suspend blind cover with fixing plate into the rear
metal sheet.
– Mount front insulation shell of the fresh water
station.
– Mount front insulation shell of the solar group
preparation.
– Fix type plate of the storage cylinder on the right
hand side of the solar group preparation on the
storage cylinder insulation (The type plate can be
found between the insulation and the cover of the
storage cylinder!)
The complete pipework must be
insulated thoroughly to minimise
heat loss!
���
Illustr. 18 Fixing of type plate
Fix type
plate here
6 Technical data of the
components
Illustr. 19 Summary of components
Note:
Further technical data and charts can be found in the
technical data sheets of the individual components!
6.1 “Regumat M3-130” DN 20 heating circuit group
Illustr. 20 “Regumat M3-130” DN 20
Solar group
preparation
Storage
cylinder
“Regumaq XH”
(fresh water
station)
“Regumat
M3-130” DN 20
(heating circuit
group)