![background image](http://html1.mh-extra.com/html/oventrop/regtronic-rq/regtronic-rq_installation-and-operating-instructions-for-the-specialised-installer_1662715032.webp)
en
32
Installation
Commissioning
Adjustments
Tr
oubleshooting
Data comm
unication
3.5
Basic settings
In the
Basic settings
menu, all basic parameters for
the controller can be adjusted. Normally, these set-
tings have been made during commissioning. They can
be subsequently changed in this menu.
Reset
By means of the reset function, all adjustments can be
set back to their factory settings.
All adjustments that have previously been made will
be lost! For this reason, a security enquiry will appear
after the reset function has been selected.
Only confi rm the security enquiry if you are sure you
want to set back all adjustment to the factory setting.
Adjustment channel
Description
Adjustment range / selection
Factory setting
Language
Selection of the menu language
Deutsch, English, Francais,
Espanol, Italiano, České,
Русский
Deutsch
Auto DST
Automatic daylight saving time
adjustment
Yes, No
Yes
Date
Adjustment of the current date
01.01.2001 … 31.12.2099
01.01.2010
Time
Adjustment of the current time
00:00 … 23:59
-
T-display standby
Display illumination time
10 … 300 s
30 s
Factory setting
back to the factory settings
Yes, No
No
back
Basic settings
3.6
SD card
The controller is equipped with an SD card slot for
SD memory cards.
With an SD card, the following functions can be car-
ried out:
• Logging measurement and balance values in the
csv format. After the transfer to a computer, the
values can be opened and visualised, e. g. in a
spreadsheet.
• Store adjustments and parameterisations on the
SD card and, if necessary, retrieve them from
there.
• Running fi rmware updates on the controller.
Firmware updates
When an SD card with a fi rmware update is inserted,
the enquiry
Update?
is indicated on the display.
The setting can be changed between
Yes
and
No
by
pressing buttons
❷
and
❹
.
Î
To run the update, select
Yes
and confi rm by
pressing button
➄
.
The update is run automatically. The indication
Please wait
and a progress bar appear on the
display. When the update has been completed, the
controller will automatically reboot and run a short
initialisation phase.
Î
To skip the update, select
No
.
The controller starts normal operation.