de
5
3
Installation
3.1
Montage
WARNUNG!
Elektrischer Schlag!
Bei geöffnetem Gehäuse liegen stromführende Bauteile frei!
Î
Vor jedem Öffnen des Gehäuses das Gerät allpolig
von der Netzspannung trennen!
Das Gerät ausschließlich in trockenen Innenräumen montieren. Für eine einwand-
freie Funktion an dem ausgewählten Ort das Gerät keinen starken elektromagne-
tischen Feldern aussetzen.
Das Gerät muss über eine zusätzliche Einrichtung mit einer Trennstrecke von min-
destens 3
mm allpolig bzw. mittels einer Trennvorrichtung (Sicherung) nach den
geltenden Installationsregeln vom Netz getrennt werden können.
Bei der Installation der Netzanschlussleitung und der Sensorleitungen auf getrenn-
te Verlegung achten.
Î
Kreuzschlitzschrauben in dem Gehäusedeckel lösen und Gehäusedeckel ab-
nehmen
Î
Aufhängung auf dem Untergrund markieren und beiliegenden Dübel mit zuge-
höriger Schraube vormontieren.
Î
Gehäuse am Aufhängungspunkt einhängen und Befestigungslöcher auf dem Un-
tergrund markieren (Lochabstand 180
mm),
Î
Löcher bohren und anschließend untere Dübel einsetzen.
Î
Gehäuse oben einhängen und mit unteren Befestigungsschrauben fixieren.
Kreuzschlitz-
schraube
Gehäusedeckel
Kabeldurchführungen mit Zugentlastungsbügeln
Drucktasten
Schiebeschalter
12.5
180
180
100
144
208
16.75
43.3
12.5
180
180
100
144
208
16.75
43.3
Aufhängung
Befestigung