![background image](http://html1.mh-extra.com/html/oventrop/regtronic-em/regtronic-em_installation-and-operating-instructions-manual_1662599027.webp)
27
en
Note
If further modules are to be connected to the controller, the sub-address
(
SA
) has to be entered fi rst.
To register the module in the controller, use the same number that has
been selected as sub-address!
Example: If
SA = 2
, register the Regtronic EM as
module 2
in the controller.
Adjustments on the second module:
Î
Assign the sub-address (
SA = 2)
.
ACTUAL state
TARGET state
Adjustments on the controller:
Î
Select module 2.
ACTUAL state
TARGET state
Î
Activate a further heating circuit (heating circuit 3).
Î
Carry out the adjustments as described above.
ACTUAL state
TARGET state
!
!
!
4
Operation
4.1
Buttons
The device is operated via the 3 buttons next to the display.
Button
: scrolling backwards through the menu or increasing adjustment values
Button
: scrolling forwards through the menu or decreasing adjustment values
Button
: changing to the adjustment mode or confi rming
If an adjustment value is shown on the display,
SEt
is displayed. Briefl y press button
in order to access the adjustment mode.
0 Auto I
4.2
Selecting channels and adjusting values
Î
Select the requested channel using buttons
and
Î
Briefl y press button
,
SEt
fl ashes (adjustment mode)
Î
Adjust the value by pressing buttons
and
Î
Briefl y press button
SEt
permanently appears, the adjusted value is stored.