Operation & menu structure
"R-Tronic" + "R-Con"
76
2. Turn the Menu-button slightly to the right or left to switch between the
submenus
R-TRONIC
and
SLAVES
(R-Con T 2P)
.
Important
:
The warning symbol will only be displayed where the problem is.
3. If an
error
occurred in the
"R-Tronic"
(warning symbol active), press the
Menu-button twice (the R-TRONIC ID display will be skipped).
X
The specific error or the incident impairing the function of the
"R-Tronic" will be displayed.
4. If an
error
occurred at the
wireless receiver
(warning symbol active),
press the Menu-button once starting from the submenu
DIAGNOSIS
X
SLAVES
. The channel number(s) to which the warning symbol refers
can be displayed here (1-4).
5.
Confirm the selection of the radio channel in front of which the warning
symbol is displayed (there is a problem with the channel) by pressing the
Menu-button.
X
The specific error or the incident impairing the function of the wireless
receiver will now be shown on the "R-Tronic" display, see below
example
:
(Illustration 73)
NOTE
The exact specification of errors and malfunctions as well as remedial
measures are detailed in chapter 7 (Display notes and error messages).
Normally, errors do not occur in the "R-Tronic" and
NO ERROR MESSAGE
will be displayed in the submenu DIAGNOSIS.